Riveting l Riveting Tools l Avro Wolfpack 5X-7X-9X
![]() |
The Avro “Wolfpack” series of riveting hammers
feature a revolutionary piston design that delivers far
more power and assists in absorbing vibration, allowing
the operator to choose a smaller and lighter tool for the
same application. |
Model |
Capacity |
Blows/minute |
Bore & Stroke |
Length |
Weight |
Alu/steel |
in / mm |
in / mm |
lb / kg |
||
WP500 Rivet Hammer 5X .401 Shank Diameter
|
|||||
10015S |
5/16" / 1/4" |
1800 |
3/4" x 2-11/16" / 19.1 x 68.3 |
8-5/16" / 227 |
4-3/4 / 2.2 |
(7.9mm / 6.35mm) |
|||||
WP700 Rivet Hammer 7X .401 Shank Diameter
|
|||||
10025S |
3/8" / 5/16" |
900 |
3/4" x 5-13/16" / 19.1 x 147.6 |
11-15/16" / 303 |
6 / 2.7 |
(6.4mm / 4.8mm) |
|||||
WP900 Rivet Hammer 9X .401 Shank Diameter
|
|||||
10035S |
5/16" / 1/4" |
1150 |
3/4" x 3 -7/8" / 19.1 x 98.4 |
9-15/16" / 252 |
5-1/8" / 2.3 |
(7.9mm / 6.4mm) |
Standard Equipment:
Special quick change retainer #92010
General:
Air Inlet 1/4” NPT Standard
1/4” BSP (Europe) ADD-E to part number; eg: 10055E
Use 5/16” (8mm) I.D Hose
All tools rated at 90 psi (620 KPA) air pressure.
Safety Precaution: Read and follow all safety operating instructions.
WARNING: Excessive or improper use may result in carpal tunnel syndrome
(”White Finger”) disease.
Face and eye protection must be worn while operating power
Tools, per ANSI B186.1